Vertical Raised Panel Take 2

[Teresa Jones]

WOW - what a difference a little knowledge and instruction makes.

Here are pictures of the raised panels I made with the vertical raised panel bit after seeking and following advice from members of this forum.

Thanks again for everyone's help!!

[Ted Shrader]

Teresa -

Great news! Glad you were able to make it work. Thanks for the pics.

Regards,
Ted

[Jim Fancher]

I like the idea of a vertical bit. Less stress on the router.

What height fence did you make? Any problems getting/keeping it square?

[Steve Jenkins]

Well now there ya go. One more to add to your repertoire.

[Chris Padilla]

Teresa,

So tell us, what was the good advise we gave you? :)

[Teresa Jones]

I like the idea of a vertical bit. Less stress on the router.

What height fence did you make? Any problems getting/keeping it square?

Jim,

The router table I used is the one from NYW. I removed the existing fence that moves to accommodate different size bits and bolted on the taller fence (14 inches). No problems with it being square since I bolted it on to an existing fence.

TJ

[Teresa Jones]

Teresa,

So tell us, what was the good advise we gave you? :)


Chris,

In an earlier post I ask for assistance in making this cut and I received several responses which led me to successfully cut raised panels with a vertical raised panel bit.

TJ