View Full Version : Stiff circular saw base
Brian Kincaid
03-25-2010, 9:52 AM
So I'm using a circular saw a lot now and I was curious if anyone has put any effort into stiffening the height adjustment to base plate. My saw is a Makita, and if I put pressure on it the saw will flex some. I would rather it not flex at all.
So, let's see those mods!
-Brian
Bill White
03-25-2010, 10:44 AM
Why are ya havin' to apply so much pressure to the saw? :confused:
Bill
Brian Kincaid
03-25-2010, 1:44 PM
I don't think I'm adding a lot of pressure, I would just like the additional stability for bevels and when using less cut depth.
-Brian
Jason White
03-26-2010, 3:12 PM
Brian, posting a picture might help us to better understand your problem.
Jason
I don't think I'm adding a lot of pressure, I would just like the additional stability for bevels and when using less cut depth.
-Brian
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.