Mark Hubl
03-22-2010, 1:38 PM
And raise you one!
What's wrong with this picture??
http://farm5.static.flickr.com/4026/4454889898_7652959223.jpg
Thought I would try some new stuff for me, a little relief carving and pyro. Figured I would do it before hollowing, cause if I hosed it up I wouldn't waste my time hollowing.
Well the results were ok, not great, but for a first, the lessons learned were good. Let's hollow. Everything going well.
Oops! :eek:
http://farm3.static.flickr.com/2749/4454891292_df1ab51999.jpg
Now I can blow up something as good as the rest of you guys out there, you know who you are. But this one was a bit of a shocker. The walls are still pretty hefty all the way down the sides. Was having some difficulty in the bottom, but didn't think I was getting thin. No catch just a nice quick release. Looked really pretty for a second spinning on the Stinger.
Didn't look too bad in the chuck.
http://farm5.static.flickr.com/4066/4454893388_3498c64631.jpg
What does Ellsworth say, if you ain't breaking something, you aint tryin'.
What's wrong with this picture??
http://farm5.static.flickr.com/4026/4454889898_7652959223.jpg
Thought I would try some new stuff for me, a little relief carving and pyro. Figured I would do it before hollowing, cause if I hosed it up I wouldn't waste my time hollowing.
Well the results were ok, not great, but for a first, the lessons learned were good. Let's hollow. Everything going well.
Oops! :eek:
http://farm3.static.flickr.com/2749/4454891292_df1ab51999.jpg
Now I can blow up something as good as the rest of you guys out there, you know who you are. But this one was a bit of a shocker. The walls are still pretty hefty all the way down the sides. Was having some difficulty in the bottom, but didn't think I was getting thin. No catch just a nice quick release. Looked really pretty for a second spinning on the Stinger.
Didn't look too bad in the chuck.
http://farm5.static.flickr.com/4066/4454893388_3498c64631.jpg
What does Ellsworth say, if you ain't breaking something, you aint tryin'.