View Full Version : Powermatic Bandsaw Owners
Nick Mastropietro
03-18-2010, 9:31 PM
Have you ever tried a 1" blade on your PWBS-14? if so, what were the results?
Eric DeSilva
03-18-2010, 9:58 PM
Have you ever tried a 1" blade on your PWBS-14? if so, what were the results?
I couldn't even properly tension 3/4" carbide blade on that saw. I've heard it opined that none of the cast iron 14" BSs are really going to be able to tension a blade like that. It drove me to buying a steel Laguna 14SUV.
Michael Peet
03-18-2010, 10:00 PM
I have that saw; the widest blade I ever used on it was a 3/4" Timberwolf. It had a crummy weld so I went back to a 1/2" blade.
Mike
Lewis Cobb
03-18-2010, 10:00 PM
Have you ever tried a 1" blade on your PWBS-14? if so, what were the results?
Hey Nick !
Seems your another PM man like myself :D
I have never used a blade that wide on my PM 14" bandsaw - all the reading I have done has advised staying away from anything larger than 0.5" - mainly because the machine cannot tension a blade bigger than that. If you try, it will most likely either bottom out the tensioning spring or worse, distort the cast iron frame of the machine ...that can't be a good thing.
Cheers,
Lewis
Jeff Willard
03-18-2010, 10:04 PM
It drove me to buying a steel Laguna 14SUV.
Good choice.
Paul Atkins
03-19-2010, 12:59 AM
I have a PM 87 20" and tried a 1" blade once. Too much drag with wet wood, too much tension and a pain to weld, coil and set up. I use 1/4" and 3/8" even to resaw up to it's depth of 11 5/8". (I just found that without the blade guard I can go to 13".)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.