? for folks w/ router table built into table saw

[travis howe]

So I have a separate router table...actually the high end jessem system w/ all the bells and whistles...

I have the ability to upgrade my table saw to something that happens to include the router table wing. My question is do you folks have a separate fence to use when doing router work, what about the slides/pushes like what jessem has? Just out of luck or what kind of setups do you all have with these types of table saws?

Thanks!

[Bruce Page]

Travis, I use the Woodhaven fence that I mount to my table saw fence with a couple of Quick-Grip clamps.
http://woodhaven.com/Woodhaven-202T-Table-Saw-Router-Fence/M/B002LU1AVK.htm

The pic is an old one but you can see how it sets up - takes about 30 seconds.

[travis howe]

Thanks Bruce. I really like the Jessem setup...obviously it's useful in many aspects... considering the amount of work (or lack there of) that I really do as a hobby guy I'm thinking I might find some cooler tools or uses for the $$ associated w/ the Jessem.

One thing I REALLY LOVE about the jessem setup is the built in push stick that keeps things square to the fence, makes things easy for sure.

[Gene DiNardo]

I used a fence attached to my besimeyer for years, recently upgraded to the one below. So far, I like it.

[scott spencer]

There are pros and cons to having the router fence attached and to having a separate router fence. I've had both, and currently have the HTC router fence attached to my Jet Exacta II fence.

http://i6.photobucket.com/albums/y203/hewood/RT/rt003.jpg
http://i6.photobucket.com/albums/y203/hewood/RT/rt001.jpg

Here's my former setup with a separate fence:
http://i6.photobucket.com/albums/y203/hewood/RT/TS1-1.jpg

[Mike Goetzke]

I have a separate fence for the router but it removes easily with two threaded knobs:

http://img.photobucket.com/albums/v212/mbg/Unisaw%20Cabinet/IMG_0902_1_1.jpg