Ed Sallee
03-15-2010, 5:40 PM
One of my humidor clients asked me to build a pet urn for him.
I used Bloodwood, Ebony & Bird's Eye Maple...
It measures 9" tall by 6-3/4 square. The dims were requested by my client. I made the bevel to accommodate a 5/8" brass plate... It's 30 degrees on a 3/4" thick piece - resulting in a 3/4" face.
Finish is Teak Oil & Butcher's Bowling Alley Wax.
Thanks for looking....
http://i302.photobucket.com/albums/nn88/evsallee/Pet%20Urn/WMWPU1F2.jpg
http://i302.photobucket.com/albums/nn88/evsallee/Pet%20Urn/WMWPU1F1.jpg
I used Bloodwood, Ebony & Bird's Eye Maple...
It measures 9" tall by 6-3/4 square. The dims were requested by my client. I made the bevel to accommodate a 5/8" brass plate... It's 30 degrees on a 3/4" thick piece - resulting in a 3/4" face.
Finish is Teak Oil & Butcher's Bowling Alley Wax.
Thanks for looking....
http://i302.photobucket.com/albums/nn88/evsallee/Pet%20Urn/WMWPU1F2.jpg
http://i302.photobucket.com/albums/nn88/evsallee/Pet%20Urn/WMWPU1F1.jpg