Paul Page
03-13-2010, 9:44 PM
Is Titebond cold press veneer the right glue to use for laminating 1/8 pieces to make a curve?
Thanks,
Paul
Paul Murphy
03-13-2010, 10:44 PM
Cold Press is listed as a PVA glue, which has some creep. If you use thick plies around a tight curve you may want a glue with a more rigid glue line. Consider one of the UF glues, such as dap weldwood plastic resin glue.
I used one of the powdered UF glues on a bent lamination a couple years ago, and there was very little springback.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.