View Full Version : Morris Chair pivot pins?
Brian Penning
03-10-2010, 5:45 PM
You glue them into the rear leg or no?
One other thing I just thought of in regards to the finishing is do you finish the back separately and then install it later on?
TIA
jim sauterer
03-10-2010, 6:39 PM
i put a dab on my pins just so they would not come out.i think if i had to get them out i could.i finished the back before i installed it.i think it made it much easier.
Jim Breen (NY)
03-10-2010, 10:42 PM
I finished separately - made it easier.
I did not glue my pins. They are a tight fit in the legs, so they don't move.
Rod Sheridan
03-11-2010, 8:27 AM
I finished separately - made it easier.
I did not glue my pins. They are a tight fit in the legs, so they don't move.
That's what I did also.
It makes moving day a lot easier if you can remove the back by simply pulling a couple of pins.........Rod.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.