Todd Schwartz
03-08-2010, 11:52 PM
Looking for suggestions on masking material for Baltic Birch.
I just finished off a couple rolls of paper masking that worked well. Stuck to the unfinished Baltic birch, but still was easy enough to remove. Unfortunately they have been around long enough that I do not remember where I got them.
Started to use a roll from LaserBits that I have had around for awhile and it does not stick at all to unfinished wood. Calls to them have gone unreturned - is my experience with the LaserBits mask material unusual?
Would really appreciate recommendations for 6" and 12" wide masking material for lasering unfinished wood.
Thanks,
Todd
I just finished off a couple rolls of paper masking that worked well. Stuck to the unfinished Baltic birch, but still was easy enough to remove. Unfortunately they have been around long enough that I do not remember where I got them.
Started to use a roll from LaserBits that I have had around for awhile and it does not stick at all to unfinished wood. Calls to them have gone unreturned - is my experience with the LaserBits mask material unusual?
Would really appreciate recommendations for 6" and 12" wide masking material for lasering unfinished wood.
Thanks,
Todd