3m R6211 Dust mask

[Prashun Patel]

Disclaimer: I am an idiot.

I cannot figure out how to get the P95 filters to attach to this facemask. Does anyone out there have one?

[Kurt Cady]

You should have a little plastic part with a large hole that fits over the P95 filter. The large organic filters clip into the mask itself and the P95 filter go on top. Then the plastic part clips on to hold the p95 in place

[Prashun Patel]

You should have a little plastic part with a large hole that fits over the P95 filter. The large organic filters clip into the mask itself and the P95 filter go on top. Then the plastic part clips on to hold the p95 in place

Oh, so you have to put on the organic cartridge in order to put the P95 ones? I'll try it.

I like the P100's because they clip on without any container. Very light and comfortable with those!

[Kurt Cady]

Yeah. It's kind of a waste of the organic filter if you only need it for dust. But I figure once its "organic protection" has worn off, it will still work ok to hold the P95's until the two that came with it run out and I can get some others