Rick Prosser
03-02-2010, 10:18 AM
I just finished assembly of my Sawstop, and I am wondering if I should have a "finish" piece for the left side edge of the top. The right side has the extension table, but I don't see any reference to a part to cover the left edge.
143806
I don't see anything in the manual, but before I call Sawstop to ask, I figured someone here would know.
Also, When I bolted up the cast iron extensions, they seem to be very flat with the straight edge, but I can still feel a bit of the line here and there - where the extensions mate to the top. Is that normal, or should I be able to adjust to the point of not feeling the connection at all?
143807
143806
I don't see anything in the manual, but before I call Sawstop to ask, I figured someone here would know.
Also, When I bolted up the cast iron extensions, they seem to be very flat with the straight edge, but I can still feel a bit of the line here and there - where the extensions mate to the top. Is that normal, or should I be able to adjust to the point of not feeling the connection at all?
143807