tom coleman
03-01-2010, 4:00 AM
I recently inherited a well made router table 41 high by 36 wide by 24 deep with an offset jesssum router plate. I want to build a fence for this table.
Looking for suggestions or plans on building a fence that will accomodate stops,feather boards, and sub fences.
This table has a Jessum router plate that can only be removed from table using a mallet..........Florida humidity probably caused wood to swell. My thought is to remove plate and start sanding edges until I get a reasonable friction fit and then add levelers as needed. Any thoughts or suggestions appreciated
Looking for suggestions or plans on building a fence that will accomodate stops,feather boards, and sub fences.
This table has a Jessum router plate that can only be removed from table using a mallet..........Florida humidity probably caused wood to swell. My thought is to remove plate and start sanding edges until I get a reasonable friction fit and then add levelers as needed. Any thoughts or suggestions appreciated