raul segura
02-28-2010, 11:19 PM
Dose any one know exactly how thick the tool post is for the Tormek grinder/ sharpener ? the part that is shaped like an [N] but with the tail straight to one side. or what rod thickness to mach with.
I was thinking of making up a jig for my grinder using there stuff.
thanks .
-----------------------------------------------------------------------
If interested Ive been looking for ideas for my dust collector and found
http://www.ptreeusa.com/dusthose.htm
In Georgia.
They carry 2,3 and 4 inch flex pipe that stays stays in place once you've set it in a position. Im exited as this will work very well on my drill press and over my band saw/table saw. Cheep but shipping could change that.
3" x 10' Black Flex Hose $12.99
4" x 10' Black Flex Hose $19.99
I was thinking of making up a jig for my grinder using there stuff.
thanks .
-----------------------------------------------------------------------
If interested Ive been looking for ideas for my dust collector and found
http://www.ptreeusa.com/dusthose.htm
In Georgia.
They carry 2,3 and 4 inch flex pipe that stays stays in place once you've set it in a position. Im exited as this will work very well on my drill press and over my band saw/table saw. Cheep but shipping could change that.
3" x 10' Black Flex Hose $12.99
4" x 10' Black Flex Hose $19.99