Hand Wheel Source???

[Dave Crabbs]

Hi All,
Does anyone know of a good source for a hand wheel that fits a jet 1236 lathe. I just started making pens and it is a pain turning the mandrel by hand and trying to sand a apply finnish. I checked the Jet site and I did not see any there.
Thanks,
Dave

[Carl Eyman]

They have an online catalog. Probably Pricey

[Brian MacDonald]

Best Wood Tools has them for around $70

[Jim Becker]

Um...you could turn one! (Many folks use wooden hand-wheels if they like to use handwheels...)

[Spence DePauw]

Try the Grizzley catalog or website. They have a fair variety of handwheels in different sizes and shaft diameters. I put one on my PC router/shaper table (the aluminium one) to make the height adjustment easier. They cost from $5 on up, but none near $50 as I recall...

Spence

[Chris Damm]

Try Reid tool. http://www.reidtool.com/store/home.asp