US Navy Anchor Vector

[David Sabot]

Just wondering if anybody here had this logo as a vector:

http://www.militarymyspacelayout.com/images/backgrounds/navy-0010.jpg

Doing a project for our guys over in Japan, and just need this to finish it off. Much thanks!

Dave

[George M. Perzel]

David;
Link's not working for me
Best regards;
George
LaserArts

[Margaret Turco]

Dave, you might check here http://www.aboyandhiscomputer.com/navyclipart.php

[David Sabot]

Thanks Margaret, the CPO pins are close, but this one has the USN on a tilt.

[John Frazee]

I checked and the CDR file I have has the chain, anchor and lettering but the letters are straight across. I think mine is the one that the Navy uses. Being that it is a CDR, you may be able to rearrange the letters. I'll check. If it works, I will repost.

[Darryl Hazen]

It looks like the creator of the original pin took a little artistic license in order to silver solder the letters. Otherwise they would have difficulty soldering the N.

[Norberto Coutinho]

Thanks Margaret, the CPO pins are close, but this one has the USN on a tilt.
Hi... try vectormagic.com

[John Frazee]

Here's what I have.

[Bruce Volden]

Here's what I have saved to V 10. HTH

Bruce

[AL Ursich]

I am a Retired Navy Chief and was stationed on a Ship in Yokosuka Japan back in 1977....

That Anchor looks like the ones I saw made from Gold in Korea, Hong Kong and Japan. Hand made Anchors... Not regulation but the Saltier Chiefs had them... Liberty Cuffs were not Regulation on my Cracker Jacks either....

I can do the Anchor in Wood too if you need it....

AL

FCC(SW) Retired