router top for 2

[James Evans]

Does anyone make a router top that holds two routers? it would just make things alot easier. Thanks, Jamie

[Vince Shriver]

Woodpecker will make a custom table for two - give them a call.

800 752-0725 or www.woodpeck.com (http://www.woodpeck.com)

[Myk Rian]

Make one out of 2 2'x4' sheets of 3/4" MDF.

[James Evans]

I have been thinking of making one. but finding the time right now is difficult. I was just hoping that someone out ther made one. Thanks for the input. I have made concrete counter tops so i might try that. It might be overkill but hey go big or go home. lol

[Jim Rimmer]

Do a search here. Somebody built a table for 3. I think it was Matt Meiser (sp?) but not sure.

[Chuck Isaacson]

Do a search here. Somebody built a table for 3. I think it was Matt Meiser (sp?) but not sure.

Actually it was Paul Greathouse.... Here is the thread.. http://www.sawmillcreek.org/showthread.php?t=124262

[Jim Rimmer]

Actually it was Paul Greathouse.... Here is the thread.. http://www.sawmillcreek.org/showthread.php?t=124262
Thanks Chuck. I'm over 60 so my memory is not subject to being correct. :p

Paul, sorry I tried to give Matt credit for yor great rt.

[Paul Greathouse]

Thanks Chuck. I'm over 60 so my memory is not subject to being correct. :p

Paul, sorry I tried to give Matt credit for yor great rt.

No problem Jim, there's so many good threads here its easy to get them mixed up.

James, before I built the 3 router table, my original intentions were to build a two router table. After laying the 2 router table out on some MDF I realized I could fit 3 router on about the same sized table. If you have any specific questions about my table let me know.

[Mike Konobeck]

You are from WI so you could easily pick this up:

http://minneapolis.craigslist.org/ank/tls/1579246669.html

[Stephen Edwards]

Paul, your 3 router station is really, really nicely done. How is it working out now that you've had time to use it?

[James Evans]

Thanks for all the input. The craigslist ad was sold already. Im going to head to the drawing board. Just need to find a little time.

[Jason White]

Bench Dog's router table extension wing (for a tablesaw) is set up so that you can bolt two of them back to back, giving you one large cast-iron router table for two routers.

Jason


Does anyone make a router top that holds two routers? it would just make things alot easier. Thanks, Jamie

[Paul Greathouse]

Paul, your 3 router station is really, really nicely done. How is it working out now that you've had time to use it?

Stephen

My kitchen cabinet project has been going really slow. I should be making doors on the triple table in a couple of weeks. So far all I have done is play around with it a little. From what I can tell it will work great for its intended use (cabinet doors). I'm going to post some pictures of the cabinets when I get done and I'll include a few pictures of the triple table doing its job.