What's Your Thoughts on the Griz G0658VS?

[James Combs]

I see the Delta 46-460 given a lot of press here but I purchase my Griz G0658VS long before I found this forum. I am curious if anyone else here has one and if there is anything that I should be concerned about given that it isn't a Delta.:D It is shy 1/4HP and 1/2" turning diameter but other then that I don't see a lot of difference. I mean "D" and "G" are real close in the alphabet.:rolleyes:. Does or has anyone see/seen any differences that could be problematic in the long term?

Edit: BTW it allows Outboard truning which is larger then 12"

Take a look here - http://www.grizzly.com/products/12-x-20-Heavy-Duty-Bench-Top-Wood-Lathe/G0658

[Terry Murphy]

I would like to know your thoughts on the lathe.
And am interesred in this lathe also.

Terry

[James Combs]

I have only used mine to make pens but I have not had the first problem with it in 6 months of ownership. Perhaps someone else on the forum has used one for larger projects.


I would like to know your thoughts on the lathe.
And am interesred in this lathe also.

Terry