Dave Cav
02-17-2010, 10:56 PM
Anyone got a G1026 shaper? What do you think of the fence? I haven't used one but the ones I looked at in Bellingahm look nice, better than the fence I have now. The only potential downside I could see was after the fence was adjusted, to change the depth of cut it's apparently necessary to readjust both fences, as the body is bolted in place and doesn't slide back and forth. That could lead to a lot of fiddling around, seems like.
I'm also looking at an Accura fence. It's a little more than the Grizzly fence, and not as refined (from the pictures I have seen), but both fences are independently adjustable, AND you can slide the main body back and forth on mounting slots, as opposed to mounting holes on the Grizzly that don't appear to give much adjustment.
Thanks
Dave
I'm also looking at an Accura fence. It's a little more than the Grizzly fence, and not as refined (from the pictures I have seen), but both fences are independently adjustable, AND you can slide the main body back and forth on mounting slots, as opposed to mounting holes on the Grizzly that don't appear to give much adjustment.
Thanks
Dave