Ridgid TP1300 Planer adjustments

[Brian Penning]

Any one know if it's possible to adjust the Repeat-A-Cut settings?
All the stop settings are no longer accurate -Wood is thicker.
Would it be because the blades were resharpened and have loss some height?
TIA

[Brett Robson]

You need to adjust the depth stop screw. Crank up the head and look beside/behind the belt and you'll see a threaded rod with a nut on the end. Loosen the upper nut and thread the rod up a bit until you get the setting you need.

Here's a picture for reference.