Steve Roxberg
10-26-2004, 9:24 PM
I am building a router table of my own design and need some suggestions. For Drawers.
The design is very much like Norms in that I can have a stack of small narrow drawers on each side of the Router bay. These can be as much as 24" deep and 4" wide, with a height of 16". So I'm thinking three four by four drawers, probably 20" deep.
The question is, do I buy cheap drawer runners or do something else?
Do you see any other problem with this design.
How did norm do it?
The design is very much like Norms in that I can have a stack of small narrow drawers on each side of the Router bay. These can be as much as 24" deep and 4" wide, with a height of 16". So I'm thinking three four by four drawers, probably 20" deep.
The question is, do I buy cheap drawer runners or do something else?
Do you see any other problem with this design.
How did norm do it?