View Full Version : Morse Taper Adapter ?
David Beeler
02-11-2010, 9:12 PM
When looking at the Morse taper adapters on the CS website I saw an accessory on the adapter page called a drift key in MT2 and MT1 size. Anyone know what this drift key is for and how is it used?
David
kenneth walker
02-11-2010, 9:21 PM
Drift Keys quickly removes taper shank drills or reamers from sleeves or sockets. Ken
Bob Hamilton
02-11-2010, 9:21 PM
From the name I would assume it is used to extract your morse taper from the adaptor. There should be a slot on the side of the adaptor socket for the drift to slide in and "wedge" the accessory taper out of the socket.
Bob
Bill Bolen
02-11-2010, 9:22 PM
I couild easily be wrong but I believe a drift key is used to seperate the chuck/taper from a drill press arbor...Bill...
Mike Lipke
02-11-2010, 11:29 PM
A Drift Key removes taper shank drills or reamers from sleeves or sockets.
kevin loftus
02-12-2010, 12:40 AM
I couild easily be wrong but I believe a drift key is used to seperate the chuck/taper from a drill press arbor...Bill...
+1 That's what i have alway's thought.:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.