Bob Hamilton
02-11-2010, 1:24 PM
Hi:
I have uploaded a short video series about spindle turning on a piece of wood that is oriented as a face grain turning. The question arose when a fellow glued up a laminated block to use to make a new front knob for his hand plane and was having trouble getting a good cut due to the grain direction.
The playlist is available at: http://www.youtube.com/view_play_list?p=A9BF3F620197FA32
Take care
Bob
I have uploaded a short video series about spindle turning on a piece of wood that is oriented as a face grain turning. The question arose when a fellow glued up a laminated block to use to make a new front knob for his hand plane and was having trouble getting a good cut due to the grain direction.
The playlist is available at: http://www.youtube.com/view_play_list?p=A9BF3F620197FA32
Take care
Bob