Adhesive backing on EVA foam

[Alexa Ristow]

Hi Creekers,

A bit of help please.

I cut 2mm to 6 mm EVA foam, also called craft foam or fun foam into scrapbooking embellishments. My biggest customer has now asked me to investigate putting a self adhesive backing onto the foam. The thicker foam can be purchased with a paper backed adhesive coating on one surface but the thinner material is not available with this option. I need to either buy sheets of film that I can transfer onto the foam prior to cutting or is there a spray on solution to my problem.

Any ideas?

Thanks,

Alexa.

[Scott Challoner]

I buy 18" x 24" adhesive sheets from Johnson Plastics. Part number SHT330. They are $3.98 each. I either apply them to 18 x 24 acrylic or cut them to the size I need on the laser.