Stephen Saar
02-05-2010, 1:30 PM
I just ordered the Rikon 18" bandsaw from Woodcraft, and I was looking at the different blades. I saw the posting on Suffolk blades so I figured I'd grab the deal and get 4 different blades. Here is what I picked for mine and why. I will probably be doing some non-ferrous metal cutting with the bandsaw from time to time, but I will mostly be using it for preparing logs for turning, or doing custom veneers. Any comments are welcome. I'm not very familiar with the different types of bandsaw blades so I was going by what information I could pull from the website.
1 x 10 RK - good for MDF and non-ferrous metals/plastic
3/4 x 2/3 VPC - good for resawing larger logs (8+ inches)
1/2 x 4PC - General work
1/4 x 8RK - Good for smaller pieces.
-Stephen
1 x 10 RK - good for MDF and non-ferrous metals/plastic
3/4 x 2/3 VPC - good for resawing larger logs (8+ inches)
1/2 x 4PC - General work
1/4 x 8RK - Good for smaller pieces.
-Stephen