trevor adair
02-01-2010, 9:32 PM
I am in process of doing a couple of built-in cabinets and shelves that will be finished with white semi gloss tinted EM6000. I am using pre-finished plywood. Because the plywood is finished on both sides one panel on each of the two cabinets will show and needs to be sprayed with the frames and doors.
My question is can I sand the panel to rough up the surface? will this be enough for the EM6000 to adhere to?
My question is can I sand the panel to rough up the surface? will this be enough for the EM6000 to adhere to?