View Full Version : Jet Bandsaw Replacement Parts
John Finley
02-01-2010, 9:14 PM
I got a used bandsaw that needs a replacement blade tensioning screw. I am sure Jet can supply that, but is there another place that may be more economical? It is a JWBS-14OS.
Larry Anderson
02-01-2010, 10:26 PM
Try here: http://www.ereplacementparts.com/
Jason White
02-02-2010, 4:57 AM
I upgraded to this one. Much better than the factory screw....
http://www.highlandwoodworking.com/Bandsaw-Tensioning--Crank--Heavy--Duty.aspx
I got a used bandsaw that needs a replacement blade tensioning screw. I am sure Jet can supply that, but is there another place that may be more economical? It is a JWBS-14OS.
Bud McCreadie
02-02-2010, 8:50 AM
My tension screw stripped out and had to be replaced. The nut also was bad. I went to Ace Hardware and got some threaded rod and a nut to fit and made a new tensioner with a round wood wheel made from scrap. Can't get any more economical.
John Finley
02-02-2010, 12:02 PM
Bud, I think that is the path I am going to take. I already got my hands on some 3/8" allthread. Thanks for the advice.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.