Bob Haskett
01-29-2010, 8:58 AM
To those of you that own the FT3000VCE (awesome router by the way if anyone is looking for one) what do you need to connect the vacuum adapter (not the dust collection port on the fence but the vacuum adapter that mounts to the actual router) to a shop vac?
NOTE: I would check myself but I am at work 45 miles from home and most of the stores to buy parts are near my office so did not want to go home, then come back here to get parts.
I was using the router by hand last night working on my Thien separator and the dust it creates with MDF is insane. It was even caked on my walls behind where I was routing.
NOTE: I would check myself but I am at work 45 miles from home and most of the stores to buy parts are near my office so did not want to go home, then come back here to get parts.
I was using the router by hand last night working on my Thien separator and the dust it creates with MDF is insane. It was even caked on my walls behind where I was routing.