A litte help in applying laq

[Peter Luch]

Aloha,

I've been trying something called MagnaLaq and am having a dang hard time applying it to stepped pieces of wood with a brush.

It just won't flow together and leaves brush marks even if I place it on thick which then causes other problems. Seems to dry so quick that I cannot go over any part even right after brushing on a layer, going right back almost messes up the existing brushed area and the two don't want to flow together.

I tried thinning it down but maybe not enough.

HELP!!!!

Thanks, Pete

[Tony Bilello]

Aloha,

I've been trying something called MagnaLaq and am having a dang hard time applying it to stepped pieces of wood with a brush..............HELP!!!!Thanks, Pete

I copied this from the ML Campbell site "Easily applied with conventional spray, airless spray, air assisted airless spray or HVLP equipment"
This product was intended for spraying only or it would say 'brushing'. That explains why it dries so quickly.