Jon Lanier
01-14-2010, 11:45 PM
Do I do Tool Gloats here? I guess it don't matter, I'm going to anyway. ha
Pictured:
Jet Contractor Style 1.5HP/ 3HP peak. (can't recall the model number)
Cast Iron Wings
50" Xacta Fence and rails/table system
Incra SE1000 Miter Gage
Jet blade and 2 Freud blades
Dado set
2 dado inserts and 1 zero clearance insert
Oak cover for the cast iron to protect if need more work area.
Not Pictured:
Penn State Industries 1HP DC1B-XL Dust Collector with 2 Micron Bags
All for $500.00
Yes, all tested and approved!
All I need to get is a mobile base... any suggestions?
Pictured:
Jet Contractor Style 1.5HP/ 3HP peak. (can't recall the model number)
Cast Iron Wings
50" Xacta Fence and rails/table system
Incra SE1000 Miter Gage
Jet blade and 2 Freud blades
Dado set
2 dado inserts and 1 zero clearance insert
Oak cover for the cast iron to protect if need more work area.
Not Pictured:
Penn State Industries 1HP DC1B-XL Dust Collector with 2 Micron Bags
All for $500.00
Yes, all tested and approved!
All I need to get is a mobile base... any suggestions?