PDA

View Full Version : Boat Hooks



Bob Smalser
01-05-2010, 10:17 AM
http://pic20.picturetrail.com/VOL12/1104763/4518261/57815603.jpg

Every boat should carry a boat hook within easy reach of the operator. If for no other reasons to save your oar blades from fending off rocks and concrete pilings, and to fish things out of the water without risking a dunking.

http://pic20.picturetrail.com/VOL12/1104763/22742347/380537560.jpg

Simple to make, you can customize them to fit the space available on a specific boat and include handy features the storebought hooks don’t have.

http://pic20.picturetrail.com/VOL12/1104763/22742347/380539287.jpg

Here a 6-foot boat hook is stacked atop a coopered 12-foot dock hook in its rack on the work boat dock.

http://pic20.picturetrail.com/VOL12/1104763/22742347/380537561.jpg

A groove cut into the hook side of the shaft lets you know where the hook is in the dark.

http://pic20.picturetrail.com/VOL12/1104763/22742347/380539285.jpg

Before finishing and painting, adjust the shaft diameter and shape so when tossed overboard, your boat hook floats upright for easy recovery. This 6-foot, bronze-head hook with 6/4 Douglas Fir shaft required no further trimming to float perfectly.

http://pic20.picturetrail.com/VOL12/1104763/22742347/380536552.jpg

The hollow dock hook lives a hard life breaking ice and shuffling around heavy, rain-filled boats and scows for bailing. It was coopered from Doug Fir staves using birdsmouth joints cut on the tablesaw, with a glass marble added to amuse the local children.

http://pic20.picturetrail.com/VOL12/1104763/22742347/378423435.jpg

But coopering combined with abuse have their limitations, and after a few years I had to strengthen the head using the construction I should have used in the first place.

http://pic20.picturetrail.com/VOL12/1104763/22742347/378423442.jpg
http://pic20.picturetrail.com/VOL12/1104763/22742347/378423446.jpg
http://pic20.picturetrail.com/VOL12/1104763/22742347/380692299.jpg
http://pic20.picturetrail.com/VOL12/1104763/22742347/378423454.jpg

What other good ideas are out there?

Jim Creech
01-06-2010, 11:12 AM
+1 on the boat hooks. They should be mandatory gear aboard any boat! I've been thinking about shaping the end of mine slightly to provide a better grip when using it to pull, maybe something like an oar handle or a lip such is on a baseball bat. A Turks Head may do just as well. Perhaps I should try that before I go whittling away on an otherwise perfectly good piece of gear.

John alder
01-08-2010, 12:41 PM
1 in my boat and 1 in the back of my pick up truck,would be lost with out it.

John Schreiber
01-08-2010, 1:29 PM
I guess I'm one of the local children looking for amusement. Where's the marble go? Is it inside the shaft so that it rattles, or attached at the end to look pretty and remind you which end to push with?