Bill Borchardt
12-31-2009, 7:31 AM
Need help from owners of a Grizzly G0586 or G0593 jointer . . . .
I just ordered the spiral head version (G0593) and I'm building a shop made mobile base (before the jointer arrives so I only have to lift it once).
Here's where I need some help . . . .
- Grizzly spec sheet says the base is 23.5" x 16.75"
- Page 12 of the manual says the base has a foot print of 23" x 17.5"
Which one is right? :confused:
Thanks in advance . . . .
Billbo
Smyrna, GA
I just ordered the spiral head version (G0593) and I'm building a shop made mobile base (before the jointer arrives so I only have to lift it once).
Here's where I need some help . . . .
- Grizzly spec sheet says the base is 23.5" x 16.75"
- Page 12 of the manual says the base has a foot print of 23" x 17.5"
Which one is right? :confused:
Thanks in advance . . . .
Billbo
Smyrna, GA