Joe Wiliams
12-29-2009, 10:39 PM
Anyone have this model or have any thoughts on it?:)
Woodcraft has this for $290
http://www.general.ca/site_general/g_produits/drill_mortiser/75-030.html
Model 75-030 M1
14” DRILL PRESS
Rotating, 45° tilting, crank-operated worktable with quick release
clamp.
Safety switch located on front of drill press head.
Adjustable spindle tension return spring.
Built-in lamp illuminates the drilling area. (Bulb not included)
Spindle is supported by high quality ball bearings.
Cast-iron pulleys reduce vibration.
Industrial 1/2 HP motor.
Heavy-duty positive depth stop for quick adjustment.
5/8” chuck with key.
Swing 13 3/8’’ (340 mm)
Drilling capacity 5/8” (16 mm)
Chuck size 5/8” (16 mm)
Spindle travel 3 1/8” (80 mm)
Spindle distance to table 15 1/4” (387 mm)
Spindle distance to base 32 1/4” (819 mm)
Table size 11 3/8” (289 mm)
Column diameter 2 7/8” (73 mm)
Number of speeds 12
Spindle speeds 280-3000 RPM
Spindle taper MT 2
Overall height 46 1/2” (1181 mm)
Base size 10” x 16 7/8” (254 x 429 mm)
Motor (pre-wired 110V) 1/2 HP, 110/220 V, 8/4 A
Weight 105 LBS (48 kg)
Woodcraft has this for $290
http://www.general.ca/site_general/g_produits/drill_mortiser/75-030.html
Model 75-030 M1
14” DRILL PRESS
Rotating, 45° tilting, crank-operated worktable with quick release
clamp.
Safety switch located on front of drill press head.
Adjustable spindle tension return spring.
Built-in lamp illuminates the drilling area. (Bulb not included)
Spindle is supported by high quality ball bearings.
Cast-iron pulleys reduce vibration.
Industrial 1/2 HP motor.
Heavy-duty positive depth stop for quick adjustment.
5/8” chuck with key.
Swing 13 3/8’’ (340 mm)
Drilling capacity 5/8” (16 mm)
Chuck size 5/8” (16 mm)
Spindle travel 3 1/8” (80 mm)
Spindle distance to table 15 1/4” (387 mm)
Spindle distance to base 32 1/4” (819 mm)
Table size 11 3/8” (289 mm)
Column diameter 2 7/8” (73 mm)
Number of speeds 12
Spindle speeds 280-3000 RPM
Spindle taper MT 2
Overall height 46 1/2” (1181 mm)
Base size 10” x 16 7/8” (254 x 429 mm)
Motor (pre-wired 110V) 1/2 HP, 110/220 V, 8/4 A
Weight 105 LBS (48 kg)