Dowelmax storage box

[Jerry Todd]

Have any SawMill Creekers built a storage box for their Dowelmax?
I am searching for something functional that would also contain the wood dowels. Just looking for ideas.
Thanks,
Jerry Todd

[Brent Smith]

Hi Jerry,

This thread may give you some ideas
http://www.sawmillcreek.org/showthread.php?t=76932&highlight=DowelMax

[richard poitras]

Jerry, I thought about building one, but I decided to spend my time on other projects (limited shop time) so I just bought a cheap plastic tool box to keep mine in. You can pick one up for about $10.00 to $15.00, but it’s not fancy or custom but very functional. But there are some nice ideas in Brent’s post / thread of the old post from SMC.

Good luck!
Richard

[Brian Penning]

I use the case from my Bosch PS20 driver.
There's enough room for the 1/4" accessories and a couple of bags of dowels.

http://lh6.ggpht.com/_eDYZqM9-MJw/SzgmxQnQTgI/AAAAAAAATHo/W9ryPfSdB4s/IMG_3420.jpg

http://lh5.ggpht.com/_eDYZqM9-MJw/Szgmxl-GDMI/AAAAAAAATHs/PSrloY4v0po/IMG_3421.jpg