Jon Finch
12-24-2009, 4:55 PM
Some pics of a few turned items that'll have a new home tomorrow.
Elm, 10"x7", walnut oil and buffed
http://www.sawmillcreek.org/attachment.php?attachmentid=136209&d=1261691005
Elm, 10"x5", walnut oil and buffed
http://www.sawmillcreek.org/attachment.php?attachmentid=136210&d=1261691005
Mulberry (WOW I had no idea how yellow/orange this wood is!), 5"x2.5", wipe-on poly and buffed
http://www.sawmillcreek.org/attachment.php?attachmentid=136211&d=1261691028
Rosewood and African blackwood, 1.75"x5", waxed/buffed
http://www.sawmillcreek.org/attachment.php?attachmentid=136212&d=1261691028
And finally, all the failures of this week. I know I'm new at this, but I can't seem to get the right thickness on the bottoms. I keep cutting right though to the other side...
http://www.sawmillcreek.org/attachment.php?attachmentid=136213&d=1261691045
Elm, 10"x7", walnut oil and buffed
http://www.sawmillcreek.org/attachment.php?attachmentid=136209&d=1261691005
Elm, 10"x5", walnut oil and buffed
http://www.sawmillcreek.org/attachment.php?attachmentid=136210&d=1261691005
Mulberry (WOW I had no idea how yellow/orange this wood is!), 5"x2.5", wipe-on poly and buffed
http://www.sawmillcreek.org/attachment.php?attachmentid=136211&d=1261691028
Rosewood and African blackwood, 1.75"x5", waxed/buffed
http://www.sawmillcreek.org/attachment.php?attachmentid=136212&d=1261691028
And finally, all the failures of this week. I know I'm new at this, but I can't seem to get the right thickness on the bottoms. I keep cutting right though to the other side...
http://www.sawmillcreek.org/attachment.php?attachmentid=136213&d=1261691045