PDA

View Full Version : Looking for lamp designs.



Jesus Torres
12-14-2009, 5:04 PM
Hi people and merry christmas. Im looking for any design or ideas to making a lamp. Any help welcome. Thanks.

Sergio Arze
12-14-2009, 8:56 PM
You can try making something like this which is not too hard. Good luck;)

Gary Lyben
12-14-2009, 9:49 PM
There are a few free plans here, they are all laser cut from thin wood or tyvek

http://www.ponoko.com/showroom/category?query=Lighting



This is an interesting company, they don't have a US distributor yet, click on the design link then lighting:

http://www.microwood.com/

I make these:

yourpersonalizedspace.com

The art work is all copyrighted, but I could give out the basic box design, they are cut from 1/8 baltic birch.

Best regards

Gary

Gary Lyben
12-17-2009, 10:01 PM
Hi

Here is the blank lamp cutting diagram in both illustrator and eps formats, I need to re install corel, so I can't post a .cdr file

I've also sent a couple of pics of finished lamps.

It takes a cord like this one:

http://www.nationalartcraft.com/images/sub-0016-03.jpg

from here:

http://www.nationalartcraft.com/subcategory.asp?gid=1&cid=1&scid=16


Best regards

Gary

Dee Gallo
12-18-2009, 8:05 AM
You can try making something like this which is not too hard. Good luck;)

Sergio, I really like this lamp! What material did you use?

cheers, dee