PDA

View Full Version : Spray Booths


Ed Gibbons
12-12-2009, 12:21 PM
I am looking to build a mobile spray booth. Pics posted and ideas suggested would be appreciated.

Thanks.
Jim McFarland
12-12-2009, 1:09 PM
I made this one from 3/4" PVC & 6 mil plastic from Lowe's using a 20" box fan with furnace filters for exhaust/intake air. I do water-based only -- this is definitely NOT recommended for solvent lacquer (I don't even use it for alcohol-based shellac). I store it on brackets attached to the garage ceiling and just use a tarp for the floor. I purchased the "door" zipper from Lee Valley. Not much to look at but it works for me.
dan sherman
12-12-2009, 1:54 PM
This one is mine, it's a positive pressure booth.
http://www.dans-hobbies.com/2009/05/05/collapsible-spray-booth/
Tony Bilello
12-13-2009, 6:54 PM
This one is mine, it's a positive pressure booth.
http://www.dans-hobbies.com/2009/05/05/collapsible-spray-booth/

How do you prevent the wind from the fans from blowing your spray all over the place?
dan sherman
12-13-2009, 6:59 PM
it's mounted high on the one side about 6 feet off the ground, to date I haven't had any issues with blowing the spray around.