View Full Version : Hook and Loop to PSA
Josh Mayfield
12-09-2009, 9:38 PM
Are there any conversion kits for hook and loop to psa sanding disks?
I have a bosch ROS and the sanding disks I need are all psa backed disks.
I am looking for 1200 grit silicon carbide for rubbing out a finish If anyone knows where to find them in hook and loop.
Thanks
Josh
David Christopher
12-09-2009, 9:52 PM
Josh, this place might have what you want http://www.onlineindustrialsupply.com/6sofoholodi.html
Jamie Buxton
12-09-2009, 11:11 PM
Bosch sells replacement sanding pads for ROS. They, like most sander manufacturers, regard the pads as wear items. They offer PSA pads in both 5" and 6" size. Page 150 in this pdf: http://www.boschtools.com/AboutBoschTools/RequestProductLiterature/Documents/2008_10_24_Download%20PDF%20Catalog/p139-150_Bosch%2007_Sander.pdf
Matt Stiegler
12-09-2009, 11:32 PM
If you strike out on finding what you need in H&L, you might try just sticking the PSA disk onto a clean used H&L disk. I've done it a few times and it works pretty well.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.