View Full Version : Just a small box
Vic Harris
11-28-2009, 4:09 PM
Thought all of you might like this
doug king
11-28-2009, 4:57 PM
Would love to have the CDR for that... Awesome stuff there...
Jack Harper
11-28-2009, 6:36 PM
You know, a little tweaking/embellishment there and you have a nice little homemade Advent calendar.
fred sanchez
11-28-2009, 7:03 PM
really nice love to have the cdr if your sharing :)
Dee Gallo
11-28-2009, 7:18 PM
Thought all of you might like this
I sure do! The structural pieces add a very nice decorative element, nice!
Thanks for sharing, dee
Alexa Ristow
11-29-2009, 2:21 AM
Hi Creekers,
Here is a 42 cell ( 7 x 6 grid ) box set up for 3mm acrylic or MDF. File is corel X3. Boxes are used for sorting of alphabets etc.
Cheers,
Alexa
Roy Nicholson
11-29-2009, 4:08 AM
That really is a lovely box.
It won't fit into my machine though.
My bed is only 460 x 300 mm
But it's given me some good ideas.
Regards
Roy N.
Vic Harris
11-29-2009, 11:26 AM
This is a double sided box I designed for earrings. I use .100 cast acrylic for the see through top and bottom.
Mike Christen
11-29-2009, 10:55 PM
Hi Vic
Thanks for sharing, very nice
Roy Nicholson
11-30-2009, 7:30 AM
Vic would it be possible for you to post a photo fo the finished box.
Regards
Roy N.
Guy Mathews
11-30-2009, 8:22 AM
Hi Creekers,
Here is a 42 cell ( 7 x 6 grid ) box set up for 3mm acrylic or MDF. File is corel X3. Boxes are used for sorting of alphabets etc.
Cheers,
Alexa
That tears it. I am getting laser even if I have to sell my kids!
Well... I guess that is a bit extreme... I'll just sell one of them!
That box is really cool. Are the tolerances so close that it just snaps together or is there some final tweaking involved on the finished pieces?
Guy
Vic Harris
11-30-2009, 9:42 PM
The picture is of the finished box, you probably couldn't make out the acrylic top and bottoms. Also the cut for the acrylic is not in the file. I made it with the thought of an earring organizer as I'm sure You all know the need. It will save my wife a minimum of 15 minutes each morning. It will seperate 48 pairs 24 top 24 bottom.
Vic
Vic Harris
11-30-2009, 9:44 PM
A litle elmers glue finishes it off
James Stokes
11-30-2009, 11:17 PM
It would be great for some one who collects miniatures. My ex does and I made something similar for her several years ago. Looking at that I may make her another one. We have remained good friends. I still give her gifts at the appropriate times.
Frank Defert
12-01-2009, 4:57 PM
Could I ask someone to please post the files in V12 or even better V10 so more people could enjoy this thread.
Thanks Frank
Scott Erwin
12-01-2009, 5:17 PM
Could I ask someone to please post the files in V12 or even better V10 so more people could enjoy this thread.
Thanks Frank
Here it is in Version 10 as requeted....
Nice work by the ones who made them.
Frank Defert
12-01-2009, 6:23 PM
Thanks Scott. I appreciate you taking the time to repost the files.
Frank
Vic Harris
12-01-2009, 7:26 PM
CMX file coming
Vic Harris
12-01-2009, 7:32 PM
shucks it didn't seem to go, I can't seem to send a cmx, sorry
Vic Harris
12-01-2009, 8:13 PM
Folks I usuall cut my slots on the table saw so I didn't notice I had left some of them out. Try this one!
Vic
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.