dennis thompson
11-27-2009, 10:05 AM
I have a Viking stove, model v dsc 4876 gss. One of the oven doors is not centered in the oven opening so that when the door is opened & closed the screw holding the door trim scapes aginst the side of the door opening. On the right side, where the scraping takes place, the space between the door & the opening is about 1/4" while on the other side it's 1/2". Clearly I need to move the door to the left to stop the scraping & center the door. For the life of me I cannot find any way to adjust the door. Anyone have any experience with this problem?
Thanks
Dennis
Thanks
Dennis