View Full Version : Power carving
Prashun Patel
11-24-2009, 4:47 PM
Anyone know where I can get a carbide grinding donut wheel for a 4" angle grinder? I'm hogging out a scooped seat on a chair. I haven't had luck finding one...
Thanks in advance
Mike Henderson
11-24-2009, 5:33 PM
This isn't an answer, but I just take a fairly large gouge, maybe a 5/30, and hog the wood out. I use a mallet to drive the gouge. Goes pretty quick.
Mike
Dick Strauss
11-24-2009, 7:03 PM
Shawn
Here are some options for power carving donuts...
https://www.woodcarverssupply.com/store/products.asp?dept=81&pagenumber=2
http://www.woodcraft.com/Product/2000926/2617/Grinding-Wheel--Tungsten-Carbide--Curved-Disc--Fine--Blue--(A).aspx
Prashun Patel
11-24-2009, 11:03 PM
THanks a lot. Woodcraft. I'm embarrassed that I didn't find it there first!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.