PDA

View Full Version : Sources for veneer core / baltic birch /apply ply plywood in NJ?


Adam Slutsky
11-22-2009, 9:22 AM
Does anyone out there have a good source for some high quality 13 layer plywood in New Jersey?
Grant Larouere
11-22-2009, 9:48 AM
North Jersey? Central Jersey? South Jersey?
Adam Slutsky
11-22-2009, 9:55 AM
I am in North Central NJ but will travel if necessary
johnny means
11-22-2009, 11:58 AM
Fessenden Hall in Pennsauken, NJ. Any sheet good you can need. Free delivery to businesses.
Philip Berman
11-22-2009, 3:09 PM
on Rte 4 in Paramus. They seem to be a great source for sheetgoods. I've purchased Baltic birch from Casterline in Morristown and it was ok, although for some reason it had been standing on edge and wasn't all that flat.
Jeffrey Makiel
11-22-2009, 7:17 PM
US Mahogany in Aberdeen has plywoods. Hardwood plywood as well as Baltic Birch plywood. They aren't cheap, but what else is new in New Jersey? They are a couple of minutes off the Garden State Parkway.

-Jeff:)
Mark Ottenheimer
11-29-2009, 5:11 PM
They have one of the largest sheet gook solection in noth Jersey. They also sell prefinished maple plywood. In Trenton NJ Willard Brothers will get any plywood you ask for. Hope this helps.