Bruce Irwin
11-20-2009, 9:24 PM
I bought a G1019Z and riser kit many years ago and finally need to buy some new blades. Unfortunately, I cannot remember if I should buy 105" or 106" blades - I remember seeing various discussion group posts when I bought it that indicate a 105" blade, but Grizzly says 106".
Are there any of you that still have a G1019Z with a riser kit and can help me with which length blad that you are using?
I plan on buying Lenox Diemaster 2 blades if that helps - 1/2", 4 tpi, and .025" thick.
Thanks in advance for your help,
Bruce
Are there any of you that still have a G1019Z with a riser kit and can help me with which length blad that you are using?
I plan on buying Lenox Diemaster 2 blades if that helps - 1/2", 4 tpi, and .025" thick.
Thanks in advance for your help,
Bruce