Set of 3 Benjamin's Best Carbide Chisel Set

[cody michael]

http://www.pennstateind.com/store/LCPM3CAR.html

anyone use these? how long would they stay sharp? can you sharpen them if they dull?

[charlie knighton]

i have not used this set, i have used benny's best and they are ok, the description says probably will not need to be sharpened, that is a new one on me



11" overall length with 8" handles


these are small tools, and with a stardard grinder rest the 3" of metal hopefully you do not have to grind away

the thing is you have to start someplace, if you can learn to use the skew and gouge you are way ahead :D

[Bobby Perry]

I had a set of those. I liked them well enough. They did stay sharp once you got them sharp. I had a problem with the carbide part breaking off. I never did replace them after that. Then hurricane Ike took them with the rest of my shop.

[Wally Dickerman]

I suggest that you stick with High speed steel for your turning tools. The carbide tools will probably stay sharp for a long time but will eventually become dull. Carbide requires a silicone carbide or a diamond wheel for sharpening.

Hey, spending a few minutes at the grinder once in a while is part of turning. My early days of turning was with carbon steel tools. I was probably using dull tools much of the time because they didn't hold an edge very long. HS tools didn't become generally available until the late 70's or early 80's. I still have some of my old Greenlee and Buck Carbon steel tools from the 50's.

Wally

[cody michael]

oh okay i was just curious thanks.

[Terry Murphy]

I had a set, because I was affraid of sharpening. But mine also broke. then I bought regular hss tools and and old grinder, much better.
It would have been cheaper if I bought the more expensive tools first.

Terry

[Bernie Weishapl]

Don't waste your money. I was given a set and they were worthless in my opinion.