Chris Barnett
11-15-2009, 8:50 PM
Looking for screw-on nozzle or something similar that can be used to inject Liquid Nails or equivalent glue (sealing material) into a cavity through a rather small opening.
I cannot enlarge the opening and need to place a glue like sealant throughout a rather long cavity. Seems I have seen maybe add-on screw type nozzles than can be attached to the simple plastic nozzles on the ends of silicone, liquid nails and such tubular packaged products, but...I cannot remember if I actually saw these gismos or had a "gee, they oughta make these things" dream.
DW suggested taping on a large diameter soda straw but the pressure would be too great for it to stay attached by that means, but she had the right idea.
Anyone know how to do this or know where to obtain such an attachment. The material I need to use is not user friendly and would perhaps harden before use if placed in a separate applicator and temporarily open to the air.
Not sure where to post such a request....so decided to start here.
Thanks...again, an off-the-wall but real problem looking for a solution.
I cannot enlarge the opening and need to place a glue like sealant throughout a rather long cavity. Seems I have seen maybe add-on screw type nozzles than can be attached to the simple plastic nozzles on the ends of silicone, liquid nails and such tubular packaged products, but...I cannot remember if I actually saw these gismos or had a "gee, they oughta make these things" dream.
DW suggested taping on a large diameter soda straw but the pressure would be too great for it to stay attached by that means, but she had the right idea.
Anyone know how to do this or know where to obtain such an attachment. The material I need to use is not user friendly and would perhaps harden before use if placed in a separate applicator and temporarily open to the air.
Not sure where to post such a request....so decided to start here.
Thanks...again, an off-the-wall but real problem looking for a solution.