PDA

View Full Version : What is best to color fill corian



Tim Baude
11-15-2009, 6:51 PM
I am buying some corian cutting boards and would like to engrave, but not sure what is the best paint to use to color fill. I am getting a few to try and just to sell here and there and give as gifts. Any suggestions would be great.
Thanks
Tim

Garrett Nors
11-15-2009, 7:00 PM
We have the people who sell us scrap corian fill and finish it for us for a nominal fee.

Tim Baude
11-15-2009, 8:30 PM
Garrett,
So after you engrave, someone else is colorfilling? Is this so it is usable as a cutting board after?
Thanks
Tim

Garrett Nors
11-15-2009, 9:08 PM
Garrett,
So after you engrave, someone else is colorfilling? Is this so it is usable as a cutting board after?
Thanks
Tim

Yeah, they fill it and finish it so it's flush (no edges at all, almost looks like it's printed on or something).

We usually tell our customers that if they want to use it they should flip it over so the front stays nice and pretty :)

Keith Outten
11-16-2009, 5:52 AM
You can purchase Dupont Corian adhesive from your local distributor. You will need to purchase the special adhesive gun and the small tubes are about 7 bucks each.