Gato Markham2
11-14-2009, 12:19 AM
I just got my dowel tap 3/4 and red oak dowel (exact same size)
measuring with the calipers there is no room for movement.
Besides sanding the down dowel and or wax or chalk, what is the best match up?
Sanding down dowel will also make it smaller for receiving a threaded nut.
There must be a correct size for the dowel to be and match up with the cut tap threads.
Any help thanks guys.
measuring with the calipers there is no room for movement.
Besides sanding the down dowel and or wax or chalk, what is the best match up?
Sanding down dowel will also make it smaller for receiving a threaded nut.
There must be a correct size for the dowel to be and match up with the cut tap threads.
Any help thanks guys.