View Full Version : 1st pic post (I hope!)
Jerry Ingraham
09-28-2004, 5:15 PM
Thanks to a thread below in which Alan Turner mentioned a free photo resizer I think I can finally post some pic's. This is a pic of my first commission, a walnut extension table. It was a barter transaction in which the customer ordered and I received a 1023s table saw. I have not even unpacked it yet as I just new that would delay the completion of the table! Tyler, please be patient and I'll post those pic's soon. I also will post the completed project pic's tomorrow as I'm rubbing out the finish and delivering the table tomorrow. That being said, man I hope this works!
Michael Stafford
09-28-2004, 5:21 PM
I can hardly wait to see it finished. Love walnut. How many leaves for the table? It looks like it could seat 10. Nice work!
Jerry Ingraham
09-28-2004, 5:25 PM
It actually isn't that big, he has a specific spot for it and gave me the dimensions he wanted 36x60 with two 11" leaves for an open size of 36x82. It is a little odd but it suits him and that suits me!
David Hayes
09-28-2004, 5:41 PM
Jerry,
Love the Walnut and am looking forward to seeing the finished piece.
Dave
Gary Max
09-28-2004, 5:49 PM
Look another person who doesn't have a clamp rack.
Oh nice table
Dick Parr
09-28-2004, 5:54 PM
Very nice Jerry. I love working with walnut. The table looks great.
Alan Turner
09-28-2004, 6:59 PM
Jerry,
A nice looking and very strightforward table, well executed. Looks like about $150 of walnut, plus the hdw, etc., so say $225 cost . . . You might think about raising your prices a bit, unless your "client" was a pretty good friend. There is a minimum wage, you know.
Someone turned me on to pixresizer, and the price was right. Glad you like it.
Alan
Glenn Clabo
09-28-2004, 7:07 PM
Jerry,
Someone turned me on to pixresizer, and the price was right. Glad you like it.
Alan
You're welcome! ;)
Bruce Page
09-28-2004, 8:05 PM
Jerry, I'm glad that you got the picture thing down because I really want to see that beautiful table with a finish on it!
Nice work!
Steve Clardy
09-28-2004, 9:13 PM
Jerry. Sure glad you got the pic thing down as ol' Tyler and Chris would be on ya HARD!!!:eek:
Thats one fine table there also. Be sure and give us the finished photos also. I love walnut, my favorite.
BTW, where did you purchase your slides? Cost?
Steve:)
Ken Fitzgerald
09-28-2004, 10:03 PM
Jerry...nice table! Can't wait to see the finished project! It amazes me how people scramble to keep Chris and Tyler off their backs!
Todd Burch
09-28-2004, 10:23 PM
So Jerry - do you not have a TS, or are you upgrading?
Table looks good. 30" tall? Homemade wooden slides or purchased? What are you finishing it with?
Sparky Paessler
09-29-2004, 8:09 AM
Great looking table! Just love working with walnut. What kind of finish are you going to be using on it?
Jason Tuinstra
09-29-2004, 10:32 AM
Jerry, glad to see you got the picture thing worked out. The table looks very nice. You did a nice job of matching that walnut. Do you have to make the chairs as well? Thanks for sharing.
Larry Crim
09-29-2004, 10:37 AM
Can't wait to see the finished product, love the grain in walnut. I'm a Wal nut.
I would make everytning out of it but the wife is partial to lighter woods.
Larry
Donnie Raines
09-29-2004, 10:44 AM
Looks like some really nice Walnut there! Looking forward to the finished product.
Frank Pellow
09-29-2004, 10:57 AM
Looking good. I too, love working with walnut.
Don Abele
09-29-2004, 11:02 AM
Jerry, beautiful table. I love the walnut. I am just finishing up a new kitchen table that is made from maple and walnut. Be sure to post pics of the finished piece.
Be well,
Doc
Jerry Ingraham
09-29-2004, 12:44 PM
All done. Here is the rundown and thank you all for your kind words. Hope I answer everyone's questions here. It is 36"wx60"lx30"h with two 11" leaves for a total 82". The leaves self store underneath on brackets that hang from the slides. It's a tung oil finish with satin spar urethane. The slides are from LV at about $50.00. I underbid it when I bartered for a brand new 1023s but it's my first commission and I'm hoping for more business and referrals. I do own a 15 yr old craftsman saw but wanted to upgrade to a cabinet saw. I'm thinking of saving the craftsman for dedicated dadoing and coupling the two saws with a table board with router undermount (which is my current setup) so I can use the fence for all three. Now to unpack that saw....
Michael Stafford
09-29-2004, 1:27 PM
Jerry it is great. The clean lines and beautiful wood choices make it a very attractive piece. I guess it will seat 8? Very nice job! When do you start on the matching chairs, sideboard, china hutch... You get all that done and you will have a complete shop full of new tools. :p
Steve Clardy
09-29-2004, 3:44 PM
Looks fantastic.:D
As for keeping your old saw, I would. I made a mistake by selling my old saw when I purchased my 1023S in 1994. Sure would be handy to keep the dado blade on. But---its gone.:rolleyes:
Steve
Chris Padilla
09-29-2004, 4:34 PM
God, walnut is so pretty! Awesome job...awesome job!
Jerry Olexa
09-29-2004, 7:19 PM
Nice job, Jerry and the wood finishing and final look is awesome!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.