View Full Version : Bandsaw blade guard?
Jason White
11-04-2009, 1:11 PM
I have an old 14" JET bandsaw that I can't find a blade-guard for (where the non-cutting side of the blade is exposed).
Anybody here make one out of wood or know of a supplier (other than JET, who doesn't have any)?
Jason
Cary Falk
11-04-2009, 2:00 PM
If I recall the old 14" Delta guard used to be made out of wood. It shouldn't be an issue making one out of wood.
glenn bradley
11-04-2009, 3:55 PM
Cary is correct. My dad inherited Grandpa's Delta 14" and the original guard is wood and still serving its purpose since the 1940's..
Paul Atkins
11-04-2009, 4:46 PM
You could use a piece of sch. 40 pvc and slot one side and bolt it on.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.