Sean Nagle
11-01-2009, 11:00 PM
I have two questions on mounting the Lee Valley Tools front vise to my under-construction workbench.
(1) What is the ideal workbench top thickness under which to mount this type of vise? My dog hole skirt is currently 4-1/4" thick. I can build up the top or route a cavity as needed.
(2) My particular vise has guide rod collets. Where should these be mounted. If anyone can post pictures of their mounts, that would help considerably.
Thanks.
(1) What is the ideal workbench top thickness under which to mount this type of vise? My dog hole skirt is currently 4-1/4" thick. I can build up the top or route a cavity as needed.
(2) My particular vise has guide rod collets. Where should these be mounted. If anyone can post pictures of their mounts, that would help considerably.
Thanks.