coring system

[Mark P. Brown]

I am looking for a bowl coring system I saw in a post 3-9 months ago. It is for strait walled bowls. A groove was cut to depth then the tool was inserted, the blank turned by hand a few rounds then the lathe was ran at low speed until the saw blade cut the bottom of the core off. The tool is a saws all blade that has been cut and welded to a 90 degree angle and mounted to a handle.
If anyone can refer me to the site I would appreciate it.
Mark

[Steve Schlumpf]

Mark - are you referring to the Bowl Saw? If so, check this out: http://www.bowlsaw.com/how.html

[Mark P. Brown]

Thats it. Thanks Steve. I am making a few candy bowls and I think the tool will work.
Mark

[Steve Schlumpf]

Great! Looking forward to seeing the candy bowls!

[Harlan Coverdale]

The guys I know who've used the Bowl Saw have liked the way it works. I think it'd be perfect for flat relatively bottomed candy dishes.

[Ron McKinley]

I've used the BowlSaws many time and they work as advertised. Dick has a great video on his website showing how simple and easy they work......Ron